MSCT-SA025TPL013TC025-CR7B

Data Sheet Request add to Inquiry Cart Back

CR7 is ideal for failure analysis 7nm-10nm technology process.

Available on FEI, JEOL, Tescan, Zeiss and Kleindiek systems.
No need Chemical Clean Process.
SEM inspection before packing.
Tip's Resistance is under 50ohm.
MESOSCOPE unique MST(Micro Surface Treatment) process to increase tip uniformity.
Wire diameter option: 0.1mm, 0.25mm, 0.3mm, 0.5mm and 0.6mm.
Available to be measured 7nm-10nm technology process.

Material	Tungsten	Coating Material	NA
Wire Diameter(WD)	0.25mm	Total Probe Length(TPL)	12.5mm
Tape Cone(TC)	2.5mm	Tip Body Diameter(TBD)	-
Tape Cone Angle Type	-	Curvature Radius(CR)	<7nm
Probe Pre-bent	YES	Pre-sleeved into Capillary	-
Suitable for measuring Process	7nm-10nm technology process

MSCT	-	SA	025	TPL013	TC025	-	CR7	B
		(1)	(2)	(3)	(4)		(5)	(6)

Application: SA series for SEM based electrical nano-probing application.
Wire diameter (WD): 0.25mm
Total probe length (TPL): 12.5mm
Tape Cone length (TC): 2.5mm
Curvature radius (CR): <7nm
Diameter at position of 50nm below apex is in the range of 35nm to 45nm.
Probe Pre-bent type.
Standard pre-bent angle is 34 degree. Customized Available.

MESOSCOPE is the world leader in Nano-scale metallic probe manufacturer.

2F.-2, No.9, Zhanye 1st Rd., East Dist., Hsinchu City 30078, Taiwan

886-3-6661059

Product